| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
HID: bpf: cast size to ssize_t when checking hid_bpf_hw_request
As reported by Sashiko:
If a transport driver encounters a hardware error and returns a negative
error code such as -EPIPE, ret is implicitly promoted to size_t when
compared against size. This causes the negative error code to evaluate
as a large positive number, making the (ret > size) condition true.
This silently converts the hardware error into a success return value
and copies the unmodified buffer back, which could leave BPF programs
operating on uninitialized or stale data.
Fix this by casting size into ssize_t to return the actual negative
error code. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: clear post-EOF pagecache when extending a file via write
Fix netfs to erase the contents of a hole created after the EOF by an
ordinary write if dirty data has been previously left there by writes
through an mmapped region. Neither the buffered nor the unbuffered/DIO
write path clears that stale pagecache.
Zero the tail of the folio straddling the EOF before an extending
write. That is the only folio that can hold data written past the EOF
through an mmap, as pages wholly beyond the EOF can't be faulted in.
The folio is zeroed rather than dropped so a concurrent extending write
can't lose data.
Both write paths downgrade the i_rwsem to shared, so extending writes
can run concurrently and the i_size read by the caller may be stale by
the time the folio is locked. Re-read i_size under the folio lock and
clamp the zeroed range up to it, so a racing write that already put
data into the folio isn't clobbered.
Wait for any writeback on the folio to finish before zeroing it so that
the pagecache isn't modified while it may still be read by the transport
during transmission. Honour IOCB_NOWAIT by returning -EAGAIN rather
than blocking on the folio lock, on writeback, or in folio_mkclean()'s
rmap walk when the folio is mapped.
truncate_pagecache() can't be used here: it must be called with the
i_rwsem held exclusively, but these write paths only hold it shared,
and it would block unconditionally, breaking IOCB_NOWAIT.
Callers that hold i_rwsem exclusively for the whole resize (truncate,
setattr, fallocate, clone) exclude any genuine concurrent buffered
writer, so staleness can instead be decided from the folio's dirty
state, as pagecache_isize_extended() already does for filesystems that
serialise writes against truncate/setattr via a single i_rwsem.
Export netfs_clear_stale_post_isize() helper to handle such case.
The helper is required by the CIFS client to fix generic/363. |
| In the Linux kernel, the following vulnerability has been resolved:
of/overlay: don't leak fragment references when changeset init fails
init_overlay_changeset() stores the number of initialized fragments
in ovcs->count only on full success. When find_target() or the
__symbols__ lookup fails partway through, the target and overlay
references taken for the fragments initialized so far are never
dropped: free_overlay_changeset() bounds its cleanup loop by
ovcs->count, which is still 0.
Store the running count on the error path so free_overlay_changeset()
puts whatever was set up. The store is guarded by ovcs->fragments
because on the allocation-failure path cnt still holds the counting
pass total while there is no fragments array; everywhere else cnt
only counts fully-initialized fragments. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: proximity: aw96103: validate firmware data length
The firmware parser reads a length from the binary header and then uses
it to walk six-byte register/value entries. A truncated firmware image
can make the parser read beyond the copied firmware buffer. A value
smaller than the four-byte count field also underflows, producing a very
large length.
Read the little-endian field with get_unaligned_le32(), as previously
proposed by David Lechner. Validate the header size, reject an
underflowed length, ensure the resulting payload is contained in the
firmware image, and require it to contain whole register/value entries. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Reject max_entries > INT_MAX in sock_map_alloc
sock_map_alloc() only rejects max_entries == 0 and otherwise allows any
u32 value. sock_map_free() then walks the sks[] array with a signed int
iterator:
int i;
for (i = 0; i < stab->map.max_entries; i++)
struct sock **psk = &stab->sks[i];
When a SOCKMAP is created with max_entries = 0xffffffff (UINT_MAX), the
allocation of 32 GiB can succeed on large-memory hosts. During free the
counter reaches 0x80000000, wraps to INT_MIN, is sign-extended by movslq
and turned into a ~16 GiB negative offset from stab->sks, pointing far
below the allocation.
The faulting access is an xchg() write in sock_map_free(). Without
KASAN, the same out-of-bounds write can fault on an unmapped vmalloc page
or corrupt an unrelated allocation if that vmalloc address is populated.
On a KASAN kernel with CONFIG_KASAN_VMALLOC=y, the shadow check for that
address hits an unmapped shadow page and oopses first:
BUG: unable to handle page fault for address: fffff521b59c5a00
RIP: 0010:kasan_check_range+0x107/0x190
Call Trace:
sock_map_free+0x93/0x190
map_create+0x68d/0xb30
__sys_bpf+0x21e/0x2e70
Vmcore confirmed stab->map.max_entries == 0xffffffff, stab->sks ==
0xffffc911ace2d000, and the faulting address sks + (s64)INT_MIN * 8
exactly at 0xffffc90dace2d000. The same buggy path is reached on the
normal close()/bpf_map_free_deferred() path whenever such a map is
destroyed.
sock_map_alloc() used to bound its allocation size through
bpf_map_charge_init(), but the bound was dropped when rlimit-based memory
accounting was removed. Reject max_entries > INT_MAX at creation time so
the signed iterator in sock_map_free() never sees a value that would
overflow.
Triggered by syzkaller and reproduced on both a 6.6-based KASAN kernel
and the upstream v7.3-rc2 kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
af_packet: fix integer overflow in prb_calc_retire_blk_tmo()
prb_calc_retire_blk_tmo() computes in 32-bit int arithmetic:
mbits = (blk_size_in_bytes * 8) / (1024 * 1024);
If I'm reading the validation right, tp_block_size is user
controlled and packet_set_ring() only rejects values that are <= 0
as int or not page aligned, so a 256MiB block goes right through
(and alloc_one_pg_vec_page() even has a vzalloc fallback for it).
0x10000000 * 8 wraps to INT_MIN, and on a NIC reporting 1 Gbps
(div == 1) the function ends up returning -2047.
The condition is actually (8 * size) mod 2^32 >= 2^31 && div == 1,
so the trigger set is [256,512), [768,1024), [1280,1536) and
[1792,2048) MiB. Other sizes wrap to non-negative values and faster
links divide the unsigned value back below 2^31, which is why this
doesn't blow up for everyone.
What makes it fatal is what happens next in init_prb_bdqc():
p1->interval_ktime = ms_to_ktime(prb_calc_retire_blk_tmo(...));
hrtimer_start(&p1->retire_blk_timer, p1->interval_ktime,
HRTIMER_MODE_REL_SOFT);
A negative relative timeout expires immediately. The callback
unconditionally returns HRTIMER_RESTART, and hrtimer_forward() turns
the negative interval into hrtimer_resolution:
if (interval < hrtimer_resolution)
interval = hrtimer_resolution;
So the SOFT timer re-fires at the maximum rate forever, holding
sk_receive_queue.lock each pass. One CPU spins in softirq until the
socket is closed. Repeat with more rings and the machine is gone.
The overflow itself is ancient - it was introduced together with
TPACKET_V3 in f6fb8f100b80 ("af-packet: TPACKET_V3 flexible buffer
implementation."). Its effect prior to f7460d2989fa ("net:
af_packet: Use hrtimer to do the retire operation", v6.18) was not
as clear-cut, though: the return value was stored into an unsigned
short retire_blk_tov, so a negative result was truncated, and a
0-jiffy delay loop could be programmed as well. Neither is nearly
as detrimental as the immediate maximum-rate spin the hrtimer
conversion turned it into.
(Unrelated to CVE-2019-20812 - that one was the ethtool failure path
returning 0, which now returns DEFAULT_PRB_RETIRE_TOV.)
Reproducer, needs CAP_NET_RAW (a --network host container has it by
default) and a 1 Gbps NIC (QEMU e1000 works):
int fd = socket(AF_PACKET, SOCK_RAW, htons(ETH_P_ALL));
bind(fd, ...);
int v = TPACKET_V3;
setsockopt(fd, SOL_PACKET, PACKET_VERSION, &v, sizeof(v));
struct tpacket_req3 req = {
.tp_block_size = 0x10000000,
.tp_block_nr = 1,
.tp_frame_size = 2048,
.tp_frame_nr = 0x10000000 / 2048,
.tp_retire_blk_tov = 0,
};
setsockopt(fd, SOL_PACKET, PACKET_RX_RING, &req, sizeof(req));
Compute in 64 bits instead. The operands are already bounded by the
existing validation, so nothing else changes. If you'd prefer a
different fix, just say so and I'll respin. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix bounds check for skb-backed dynptrs
The skb_pointer_if_linear() function checks whether a
memory region of length len starting at offset off into
the skb is in the linear area, and returns a pointer to
the region if so. The check currently subtracts between
skb_headlen and offset of the check, and since skb_headlen
is unsigned the subtraction can underflow. This causes the
bounds check to spuriously pass and generate an arbitrary
pointer of the form *(skb->data + off).
The only user of this helper is currently skb-backed BPF
dynptr code. Returning the wrong pointer leads to the
dynptr erroneously being backed with invalid memory.
Ensure the subtraction cannot underflow, and fail the check if
it would. Use u64 arithmetic to also prevent overflow when
calculating (skb_headlen(skb) - off) since off is unsigned. |
| In the Linux kernel, the following vulnerability has been resolved:
net: atl1e: fix soft lockup on out-of-range hw_next_to_clean read
Same issue as atl1c (see the first commit in this series, "net:
atl1c: fix soft lockup on out-of-range tpd_cons read"): the hardware
can report an out-of-range hw_next_to_clean (seen as 0xffff) while
the PCIe link/MAC is resetting. An out-of-range value can never be
reached and the loop below would spin forever. Treat it as "nothing
new to clean" instead. |
| In the Linux kernel, the following vulnerability has been resolved:
sysctl: Check range in proc_dointvec_ms_jiffies_minmax
Add the range check to do_proc_int_conv_ms_jiffies_minmax that commit
d174174c6776 ("sysctl: replace SYSCTL_INT_CONV_CUSTOM macro with
functions") incorrectly removed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: xfrm: reject unrepresentable espintcp transport headers
ESP-in-TCP can hand xfrm packets whose transport header offset no longer
fits after the stream parser trims the TCP envelope. The plain transport
header reset truncates that offset and triggers the skb warning path.
Use the careful transport-header helper and drop the skb through the
existing XFRM error path when the offset cannot be represented. |
| A Function Call With Incorrect Variable or Reference as Argument vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated adjacent attacker to cause an rpd crash via specifically malformed LSP-ping. |
| An Incorrect Calculation vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos EVO allows a remote BGP EVPN neighbor to cause an rpd crash when SRv6 EVPN multihoming is configured. |
| A vulnerability has been found in macrozheng mall 1.0.3 dcaa93b. The impacted element is the function OmsOrderServiceImpl.updateMoneyInfo of the file /order/update/moneyInfo of the component mall-admin/mall-portal. The manipulation leads to incorrect calculation. The attack can be initiated remotely. The vendor deleted the GitHub issue for this vulnerability without any explanation. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: validate DRAW_PRIMITIVES header size before division
vmw_cmd_draw() computes
maxnum = (header->size - sizeof(cmd->body)) / sizeof(*decl);
where header->size is u32 and is taken straight from the user-supplied
command stream. When header->size is less than sizeof(cmd->body) the
unsigned subtraction wraps to nearly 4 GiB, producing a huge maxnum.
Any user-controlled cmd->body.numVertexDecls then passes the bound and
the loop dereferences decl[i] far past the end of the kernel command
bounce buffer, producing an out-of-bounds read of kernel memory.
Reject undersized headers up front. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: meson: aiu: Validate written enum values
The AIU HDMI and internal codec mux put callbacks use the written enum
value with snd_soc_enum_item_to_val() before checking whether the value is
valid for the enumeration.
Reject out-of-range values before converting the enum item, matching the
validation already done by the G12A HDMI and internal codec mux controls. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_u32: reject invalid shift counts
u32_match_it() executes rule-supplied shift operands on a 32-bit
value. A malformed u32 rule can provide a shift count of 32 or more,
triggering an undefined shift out-of-bounds during packet evaluation.
Validate XT_U32_LEFTSH and XT_U32_RIGHTSH operands in
u32_mt_checkentry() and reject malformed rules before they reach the
packet path. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: Add preempt_{disable,enable}_nested() in reqsk_queue_hash_req().
syzbot reported a weird reqsk->rsk_refcnt underflow in
__inet_csk_reqsk_queue_drop().
The captured reqsk_put() in __inet_csk_reqsk_queue_drop()
is called only when it successfully removes reqsk from ehash.
Moreover, reqsk_timer_handler() calls another reqsk_put()
after that.
This indicates that the reqsk was missing both refcnts for
ehash and the timer itself.
Since all the syzbot reports had PREEMPT_RT enabled, the only
possible scenario is that reqsk_queue_hash_req() is preempted
after mod_timer() and before refcount_set(), and then the timer
triggered after 1s aborts the reqsk due to its listener's close().
Let's wrap mod_timer() and refcount_set() with
preempt_disable_nested() and preempt_enable_nested().
Note that inet_ehash_insert() holds the normal spin_lock()
(mutex in PREEMPT_RT), so it must be called outside of
preempt_disable_nested(), but this is fine.
The lookup path just ignores 0 sk_refcnt entries in ehash
and tries to create another reqsk, but this will fail at
inet_ehash_insert().
[0]:
refcount_t: underflow; use-after-free.
WARNING: lib/refcount.c:28 at refcount_warn_saturate+0xb2/0x110 lib/refcount.c:28, CPU#0: ktimers/0/16
Modules linked in:
CPU: 0 UID: 0 PID: 16 Comm: ktimers/0 Tainted: G L syzkaller #0 PREEMPT_{RT,(full)}
Tainted: [L]=SOFTLOCKUP
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/18/2026
RIP: 0010:refcount_warn_saturate+0xb2/0x110 lib/refcount.c:28
Code: e4 7d d1 0a 67 48 0f b9 3a eb 4a e8 38 3d 23 fd 48 8d 3d e1 7d d1 0a 67 48 0f b9 3a eb 37 e8 25 3d 23 fd 48 8d 3d de 7d d1 0a <67> 48 0f b9 3a eb 24 e8 12 3d 23 fd 48 8d 3d db 7d d1 0a 67 48 0f
RSP: 0000:ffffc90000157948 EFLAGS: 00010246
RAX: ffffffff84a1301b RBX: 0000000000000003 RCX: ffff88801ca98000
RDX: 0000000000000100 RSI: 0000000000000000 RDI: ffffffff8f72ae00
RBP: ffffffff99ae3b01 R08: ffff88801ca98000 R09: 0000000000000005
R10: 0000000000000100 R11: 0000000000000004 R12: ffff8880425ef568
R13: ffff8880425ef4f8 R14: ffff8880425ef578 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff888126386000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7b46710e9c CR3: 000000000dbb6000 CR4: 00000000003526f0
Call Trace:
<TASK>
__refcount_sub_and_test include/linux/refcount.h:400 [inline]
__refcount_dec_and_test include/linux/refcount.h:432 [inline]
refcount_dec_and_test include/linux/refcount.h:450 [inline]
reqsk_put include/net/request_sock.h:136 [inline]
__inet_csk_reqsk_queue_drop+0x3ce/0x440 net/ipv4/inet_connection_sock.c:1007
reqsk_timer_handler+0x651/0xdf0 net/ipv4/inet_connection_sock.c:1137
call_timer_fn+0x192/0x5e0 kernel/time/timer.c:1748
expire_timers kernel/time/timer.c:1799 [inline]
__run_timers kernel/time/timer.c:2374 [inline]
__run_timer_base+0x6a3/0x9f0 kernel/time/timer.c:2386
run_timer_base kernel/time/timer.c:2395 [inline]
run_timer_softirq+0x67/0x170 kernel/time/timer.c:2403
handle_softirqs+0x1de/0x6d0 kernel/softirq.c:622
__do_softirq kernel/softirq.c:656 [inline]
run_ktimerd+0x69/0x100 kernel/softirq.c:1151
smpboot_thread_fn+0x541/0xa50 kernel/smpboot.c:160
kthread+0x388/0x470 kernel/kthread.c:436
ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/umem: Fix truncation for block sizes >= 4G
When the iommu is used the linearization of the mapping can give a single
block that is very large split across multiple SG entries.
When __rdma_block_iter_next() reassembles the split SG entries it is
overflowing the 32 bit stack values and computed the wrong DMA addresses
for blocks after the truncation.
Use the right types to hold DMA addresses. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix watch_id bounds checking in debug address watch v2
The address watch clear code receives watch_id as an unsigned value
(u32), but some helper functions were using a signed int and checked
bits by shifting with watch_id.
If a very large watch_id is passed from userspace, it can be converted
to a negative value. This can cause invalid shifts and may access
memory outside the watch_points array.
drm/amdkfd: Fix watch_id bounds checking in debug address watch v2
Fix this by checking that watch_id is within MAX_WATCH_ADDRESSES before
using it. Also use BIT(watch_id) to test and clear bits safely.
This keeps the behavior unchanged for valid watch IDs and avoids
undefined behavior for invalid ones.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_debug.c:448
kfd_dbg_trap_clear_dev_address_watch() error: buffer overflow
'pdd->watch_points' 4 <= u32max user_rl='0-3,2147483648-u32max' uncapped
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_debug.c
433 int kfd_dbg_trap_clear_dev_address_watch(struct kfd_process_device *pdd,
434 uint32_t watch_id)
435 {
436 int r;
437
438 if (!kfd_dbg_owns_dev_watch_id(pdd, watch_id))
kfd_dbg_owns_dev_watch_id() doesn't check for negative values so if
watch_id is larger than INT_MAX it leads to a buffer overflow.
(Negative shifts are undefined).
439 return -EINVAL;
440
441 if (!pdd->dev->kfd->shared_resources.enable_mes) {
442 r = debug_lock_and_unmap(pdd->dev->dqm);
443 if (r)
444 return r;
445 }
446
447 amdgpu_gfx_off_ctrl(pdd->dev->adev, false);
--> 448 pdd->watch_points[watch_id] = pdd->dev->kfd2kgd->clear_address_watch(
449 pdd->dev->adev,
450 watch_id);
v2: (as per, Jonathan Kim)
- Add early watch_id >= MAX_WATCH_ADDRESSES validation in the set path to
match the clear path.
- Drop the redundant bounds check in kfd_dbg_owns_dev_watch_id(). |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: Use u32 for non-negative values in ceph_monmap_decode()
This patch fixes unnecessary implicit conversions that change signedness
of blob_len and num_mon in ceph_monmap_decode().
Currently blob_len and num_mon are (signed) int variables. They are used
to hold values that are always non-negative and get assigned in
ceph_decode_32_safe(), which is meant to assign u32 values. Both
variables are subsequently used as unsigned values, and the value of
num_mon is further assigned to monmap->num_mon, which is of type u32.
Therefore, both variables should be of type u32. This is especially
relevant for num_mon. If the value read from the incoming message is
very large, it is interpreted as a negative value, and the check for
num_mon > CEPH_MAX_MON does not catch it. This leads to the attempt to
allocate a very large chunk of memory for monmap, which will most likely
fail. In this case, an unnecessary attempt to allocate memory is
performed, and -ENOMEM is returned instead of -EINVAL. |
