| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Null pointer dereference in Virtual Hard Disk (VHD) Miniport Driver allows an unauthorized attacker to deny service locally. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| RF4CE protocol dissector crash in 4.6.0 to 4.6.8 and 4.4.0 to 4.4.18 allows denial of service |
| PEAK CAN TRC file parser crash in 4.6.0 to 4.6.8 allows denial of service |
| Espruino 2v29 (commit bffc6d0) contains a NULL pointer dereference vulnerability in jslGetRawString() in src/jslex.c. Crafted raw/binary string input can cause the lexer to pass a NULL iterator target to jsvLockAgain(). In RELEASE/NO_ASSERT builds, the missing assertion guard allows a write through the NULL pointer, resulting in memory corruption and application termination or denial of service. |
| parse_write_op() in subsys/net/lib/lwm2m/lwm2m_message_handling.c handles inbound CoAP WRITE/CREATE requests that carry a Block1 option. For the first block of a transfer it called init_block_ctx() and then immediately stored the peer-selected block size with block_ctx->ctx.block_size = block_size before inspecting the return code. init_block_ctx() sets the caller's pointer to NULL and returns -ENOMEM when no entry of the static block1_contexts[] pool is free or timed out, so that store dereferences a NULL pointer.
The pool holds CONFIG_LWM2M_NUM_BLOCK1_CONTEXT entries (default 3) and an entry is only reclaimed once its transfer completes, fails, or ages past 30 seconds. A peer that reaches the client's LwM2M socket can therefore start three block-wise writes on three distinct object paths with the CoAP More bit set and leave them incomplete, then send the first block of a fourth write on a new path to reach the unguarded dereference. Reachability is gated only by the connected UDP socket's source-address filter unless CONFIG_LWM2M_DTLS_SUPPORT is enabled — which has no default — so in a NoSec deployment an on-path or address-spoofing attacker needs no credentials; the same sequence is also reachable from a bootstrap or lower-trust server, and can be hit accidentally by a legitimate server running four concurrent block transfers.
The write targets a fixed low address with a value between 0 and 7, so the consequence is a fatal memory fault (BusFault or corrupted low memory leading to a fault) rather than a usable memory-corruption primitive: the device crashes or resets. Confidentiality and integrity are not affected. The fix moves the store below the guard and validates the context pointer itself instead of the return code, so the context is only touched once it is known to be valid. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to version 7.0.16, the Lua TLS certificate information helper could dereference NULL certificate fields when a Lua script requested certificate information for TLS traffic where some certificate fields were absent. Crafted TLS traffic processed by a deployment using affected Lua TLS scripting could crash Suricata, resulting in denial of service. Version 7.0.16 contains a fix. As a workaround, avoid Lua scripts that call TLS certificate information helpers on untrusted traffic (`TlsGetCertInfo` function), or update scripts to handle missing certificate fields where possible. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. From 8.0.0 until 8.0.6, src/datasets-context-json.c assumes that a configured JSON or NDJSON dataset value_key resolves to a string. A trusted or untrusted dataset or rule feed containing a non-string value for that key can cause a NULL pointer dereference during startup, configuration test mode, or rule reload, crashing Suricata before traffic processing. This issue is fixed in version 8.0.6. |
| A vulnerability was found in Trusted Domain Project OpenDMARC up to 1.4.2. This vulnerability affects the function strcasecmp in the library libopendmarc/opendmarc_policy.c. The manipulation results in handling of exceptional conditions. The attack can be executed remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security flaw has been discovered in Trusted Domain Project OpenARC up to 1.0.0.Beta1. Impacted is the function arc_parse_canon_t in the library libopenarc/arc-canon.c of the component libopenarc. The manipulation results in null pointer dereference. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. Upgrading to version 1.0.0.Beta0 is recommended to address this issue. Upgrading the affected component is advised. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix queue teardown NULL dma_free and bitmap locking
qla25xx_free_req_que() and qla25xx_free_rsp_que() have two pre-existing
bugs exposed on the error path of qla25xx_create_{req,rsp}_que():
1. When dma_alloc_coherent() fails during queue creation, the error
path calls the free function with req->ring / rsp->ring still NULL
(from kzalloc). The unconditional dma_free_coherent() with a NULL
cpu_addr is undefined behavior and can panic.
2. The free functions clear req_qid_map / rsp_qid_map under vport_lock,
but the create functions protect the same bitmaps with mq_lock.
This provides no mutual exclusion. Additionally, the create error
path clears the bit and releases mq_lock before calling the free
function, creating a window where another thread can allocate the
same que_id and have its ha->req_q_map entry clobbered by the
subsequent lockless NULL assignment in the free function.
Fix by:
- Guarding dma_free_coherent() with a NULL check on the ring pointer.
- Using mq_lock (the lock held by all creators) in the free functions
to atomically NULL the map entry and clear the bitmap bit.
- Removing the now-redundant clear_bit blocks from the create error
paths since the free functions handle it atomically. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Null out freed pointers in qla2x00_mem_alloc() error path
When qla2x00_mem_alloc() fails, qla2x00_probe_one() jumps to
probe_hw_failed and calls qla2x00_mem_free(). Several error labels in
qla2x00_mem_alloc() freed adapter members (elsrej.c, purex_dma_pool,
flt, sfp_data, loop_id_map, async_pd, sf_init_cb, ex_init_cb, npiv_info)
but left the pointers dangling. qla2x00_mem_free() then freed them a
second time. Worse, for the dma_pool members it issued
dma_pool_free(ha->s_dma_pool, ...) after s_dma_pool had already been
destroyed and set to NULL at fail_s_dma_pool, dereferencing a NULL pool.
Clear each freed pointer (and its DMA handle) in the error labels so the
subsequent qla2x00_mem_free() skips them. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix null pointer dereference in devcoredump cleanup
In xe_devcoredump_snapshot_free(), ss->gt may be NULL when the snapshot
was never fully populated (e.g., when cleanup is triggered without a
prior capture). Guard the xe_guc_capture_put_matched_nodes() call with
IS_ERR_OR_NULL() to prevent a null dereference.
In xe_devcoredump_free(), the deferred work is only queued when a
coredump is captured, so guard cancel_work_sync() with a check on
coredump->captured. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: Add NULL check for chip->edcca_th in rtw_fw_adaptivity_result()
It was recently reported that rtw_fw_adaptivity_result()
in fw.c dereferences rtwdev->chip->edcca_th without
a NULL check. The issue is that devices with the
8821CE chip don't define edcca_th in their chip
info. As a result, when rtw_fw_adaptivity_result()
tries to dereference it, the kernel triggers an oops.
Add a NULL check for edcca_th before dereferencing
it in rtw_fw_adaptivity_result() in fw.c. Placing
the check at the function entry avoids logging any
garbage values.
This change does not address the root cause for
this behavior, but it prevents the NULL dereference
and the resulting oops while a more permanent solution
is developed.
Tested on a 8822CE chip which defines edcca_th, so
this issue is not present on it, but it still uses
this driver and I can verify there are no regressions. |
| In the Linux kernel, the following vulnerability has been resolved:
media: chips-media: wave5: Release m2m_ctx after Instance Removed from List
Possible use after free if IRQ thread manages to obtain spinlock between
m2m_ctx release and wave5_release function removing stream instance from
list of active instances. The IRQ thread looks for the m2m_ctx which is
freed so null pointer dereference occurs. |
| In the Linux kernel, the following vulnerability has been resolved:
media: dm1105: fix missing error check for dma_alloc_coherent
The return value of dm1105_dma_map(), which handles DMA memory allocation,
is ignored in dm1105_hw_init(). If dma_alloc_coherent() fails, the driver
will proceed using a NULL pointer for DMA transfers, leading to a kernel
oops or invalid hardware access.
Fix this by checking the return value and propagating -ENOMEM on failure. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ixp4xx - fix buffer chain unwind on allocation failure
chainup_buffers() builds a linked list of buffer descriptors for a
scatterlist. If dma_pool_alloc() fails while constructing the list, the
current code sets buf to NULL and later dereferences it unconditionally
at the end of the function:
buf->next = NULL;
buf->phys_next = 0;
This can lead to a null-pointer dereference on allocation failure.
If the failure happens after part of the descriptor chain has already
been allocated and DMA-mapped, the partially constructed chain also
needs to be released.
Fix this by terminating the partially constructed chain on allocation
failure and letting the callers unwind it via their existing cleanup
paths. Also fix ablk_perform() to preserve the hook pointers before
checking for failure, so partially built chains can be freed correctly. |
| A flaw has been found in Trusted Domain Project OpenDMARC up to 1.4.2. Affected by this vulnerability is the function opendmarc_spf_ipv6_explode in the library libopendmarc/opendmarc_spf.c of the component SPF Parser. This manipulation of the argument cp causes null pointer dereference. It is possible to initiate the attack remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| libde265 commit 4d45a6b contains a NULL pointer dereference vulnerability in the NAL parsing path. When de265_push_NAL() is called with a zero-length NAL unit, the resulting NAL_unit may retain a NULL backing buffer, which is subsequently passed as the destination argument to memcpy() in NAL_unit::set_data(). Although the copy length is zero, this violates the nonnull requirement of memcpy() and results in undefined behavior, causing process termination in UBSan-instrumented builds and denial of service. |
| OpenEXR 3.4.14 contains a NULL Pointer Dereference in the C++ attribute parsing path. A specially crafted EXR file containing an unknown-type attribute with dataSize set to zero causes the parser to create an opaque attribute with a NULL packed_data pointer. The OpaqueAttribute constructor passes the NULL pointer to memcpy() without validating the zero-size condition, resulting in undefined behavior and process termination, leading to denial of service. |
