| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
iio: accel: mma8452: handle I2C read error(s) in mma8452_read()
Currently, If i2c_smbus_read_i2c_block_data() fails but
mma8452_set_runtime_pm_state() succeeds, mma8452_read() returns 0.
As a result, the caller mma8452_read_raw() assumes the read was
successful and proceeds to use a buffer containing uninitialized
stack memory.
Add proper checking of the I2C read return value and propagate errors
to the caller. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Initialize dpi variable to zero
dpi is initialized only for BNXT_RE_ALLOC_WC_PAGE, but copied
for all the cases. So initialize the dpi to 0. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs-schemes: fix dir put orders in access_pattern_add_dirs()
Patch series "mm/damon/sysfs-schemes: fix wrong directories put orders in
error paths".
Error paths of damon_sysfs_access_pattern_add_dirs() and
damon_sysfs_scheme_add_dirs() functions put references to directories in
wrong orders. As a result, uninitialized memory dereference and/or
memory leak can happen. Fix those.
This patch (of 2):
In access_pattern_add_dirs(), error handling path puts references starting
from setup failed directories. If the failure happpened from the initial
allication in the setup functions, uninitialized memory dereference
happen. The allocation failures will not commonly happen, but the
consequence is quite bad. Fix the wrong reference put orders.
The issue was discovered [1] by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
device property: initialize the remaining fields of fwnode_handle in fwnode_init()
If a firmware node is allocated on the stack (for instance: temporary
software node whose life-time we control) or on the heap - but using a
non-zeroing allocation function - and initialized using fwnode_init(),
its secondary pointer will contain uninitialized memory which likely
will be neither NULL nor IS_ERR() and so may end up being dereferenced
(for example: in dev_to_swnode()). Set fwnode->secondary to NULL on
initialization. While at it: initialize the remaining fields of struct
fwnode_handle too just to be sure.
[ Fix typo in commit message. - Danilo ] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rt2x00: avoid full teardown before work setup in probe
rt2x00lib_probe_dev() uses the full rt2x00lib_remove_dev() teardown for
all probe failures. However, drv_data allocation and workqueue allocation
can fail before intf_work, autowakeup_work and sleep_work have been
initialized.
Do not enter the full remove path until the probe has reached the point
where those work items are set up. Return directly for drv_data allocation
failure, and use a small early cleanup path for workqueue allocation
failure.
This issue was found by our static analysis tool and then confirmed by
manual review of rt2x00lib_probe_dev() and rt2x00lib_remove_dev(). The
early probe exits should not call a common teardown path that assumes the
later work setup has already completed.
A QEMU PoC forced alloc_ordered_workqueue() to fail before the work
initializers are reached. The resulting fail path entered
rt2x00lib_remove_dev(), and DEBUG_OBJECTS reported invalid work drains with
rt2x00lib_probe_dev() and rt2x00lib_remove_dev() in the stack. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: reset full ip_vs_seq structs in ip_vs_conn_new
Commit 9a05475cebdd ("ipvs: avoid kmem_cache_zalloc in
ip_vs_conn_new") changed ip_vs_conn_new() to allocate an ip_vs_conn
object with kmem_cache_alloc(). The function then initializes many
fields explicitly, but only resets in_seq.delta and out_seq.delta in the
two struct ip_vs_seq members.
That leaves init_seq and previous_delta uninitialized. This is normally
harmless while the corresponding IP_VS_CONN_F_IN_SEQ or
IP_VS_CONN_F_OUT_SEQ flag is clear. For connections learned from a sync
message, however, ip_vs_proc_conn() preserves those flags from
IP_VS_CONN_F_BACKUP_MASK and passes opt=NULL when the message omits
IPVS_OPT_SEQ_DATA. In that case the new connection can be hashed with
SEQ flags set but with the rest of in_seq/out_seq still containing stale
slab data.
When a packet for such a connection is later handled by an IPVS
application helper, vs_fix_seq() and vs_fix_ack_seq() use
previous_delta and init_seq to rewrite TCP sequence numbers. A malformed
sync message can therefore make forwarded packets carry stale slab bytes
in their TCP seq/ack numbers, and can also corrupt the forwarded TCP
flow.
Reset both struct ip_vs_seq members completely before publishing the
connection. This matches the existing "reset struct ip_vs_seq" comment
and keeps the sequence-adjustment gates inactive unless valid sequence
data is installed later. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to cause a denial of service due to the use of an uninitialized variable. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ip_tunnel: make sure to pull inner header in ip_tunnel_rcv()
Apply the same fix than ones found in :
8d975c15c0cd ("ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()")
1ca1ba465e55 ("geneve: make sure to pull inner header in geneve_rx()")
We have to save skb->network_header in a temporary variable
in order to be able to recompute the network_header pointer
after a pskb_inet_may_pull() call.
pskb_inet_may_pull() makes sure the needed headers are in skb->head.
syzbot reported:
BUG: KMSAN: uninit-value in __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline]
BUG: KMSAN: uninit-value in INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline]
BUG: KMSAN: uninit-value in IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline]
BUG: KMSAN: uninit-value in ip_tunnel_rcv+0xed9/0x2ed0 net/ipv4/ip_tunnel.c:409
__INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline]
INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline]
IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline]
ip_tunnel_rcv+0xed9/0x2ed0 net/ipv4/ip_tunnel.c:409
__ipgre_rcv+0x9bc/0xbc0 net/ipv4/ip_gre.c:389
ipgre_rcv net/ipv4/ip_gre.c:411 [inline]
gre_rcv+0x423/0x19f0 net/ipv4/ip_gre.c:447
gre_rcv+0x2a4/0x390 net/ipv4/gre_demux.c:163
ip_protocol_deliver_rcu+0x264/0x1300 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x2b8/0x440 net/ipv4/ip_input.c:233
NF_HOOK include/linux/netfilter.h:314 [inline]
ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254
dst_input include/net/dst.h:461 [inline]
ip_rcv_finish net/ipv4/ip_input.c:449 [inline]
NF_HOOK include/linux/netfilter.h:314 [inline]
ip_rcv+0x46f/0x760 net/ipv4/ip_input.c:569
__netif_receive_skb_one_core net/core/dev.c:5534 [inline]
__netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5648
netif_receive_skb_internal net/core/dev.c:5734 [inline]
netif_receive_skb+0x58/0x660 net/core/dev.c:5793
tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1556
tun_get_user+0x53b9/0x66e0 drivers/net/tun.c:2009
tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2055
call_write_iter include/linux/fs.h:2087 [inline]
new_sync_write fs/read_write.c:497 [inline]
vfs_write+0xb6b/0x1520 fs/read_write.c:590
ksys_write+0x20f/0x4c0 fs/read_write.c:643
__do_sys_write fs/read_write.c:655 [inline]
__se_sys_write fs/read_write.c:652 [inline]
__x64_sys_write+0x93/0xd0 fs/read_write.c:652
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Uninit was created at:
__alloc_pages+0x9a6/0xe00 mm/page_alloc.c:4590
alloc_pages_mpol+0x62b/0x9d0 mm/mempolicy.c:2133
alloc_pages+0x1be/0x1e0 mm/mempolicy.c:2204
skb_page_frag_refill+0x2bf/0x7c0 net/core/sock.c:2909
tun_build_skb drivers/net/tun.c:1686 [inline]
tun_get_user+0xe0a/0x66e0 drivers/net/tun.c:1826
tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2055
call_write_iter include/linux/fs.h:2087 [inline]
new_sync_write fs/read_write.c:497 [inline]
vfs_write+0xb6b/0x1520 fs/read_write.c:590
ksys_write+0x20f/0x4c0 fs/read_write.c:643
__do_sys_write fs/read_write.c:655 [inline]
__se_sys_write fs/read_write.c:652 [inline]
__x64_sys_write+0x93/0xd0 fs/read_write.c:652
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b |
| A use of uninitialized value vulnerability exists in the Matter SDK (connectedhomeip) before 1.4.0, where the `GetDestinationGroupId().Value()` method is called without first checking whether a value exists. This leads to a crash when an InvokeCommand is sent without initializing the destination group ID. The issue affects all versions before commit 0360cc3 (Dec 5, 2024) and leads to denial of service through SIGABRT. It is fixed by adding a .HasValue() check before access. |
| A vulnerability was determined in WonderTrader up to 0.9.9. This impacts an unknown function of the file src/Includes/WTSTradeDef.hpp of the component TraderATP Cash Trade Conversion. Executing a manipulation of the argument m_offsetType can lead to use of uninitialized variable. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| Uninitialized Use in GPU in Google Chrome on Android prior to 151.0.7922.109 allowed a remote attacker who had compromised the renderer process to obtain potentially sensitive information from process memory via a crafted HTML page. (Chromium security severity: High) |
| Uninitialized Use in Skia in Google Chrome prior to 151.0.7922.109 allowed a remote attacker who had compromised the renderer process to leak cross-origin data via a crafted HTML page. (Chromium security severity: High) |
| Uninitialized Use in Skia in Google Chrome prior to 151.0.7922.109 allowed a remote attacker who had compromised the renderer process to leak cross-origin data via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/hyperv: validate resolution_count and fix WIN8 fallback
A SYNTHVID_RESOLUTION_RESPONSE with resolution_count > 64 walks past
the supported_resolution[SYNTHVID_MAX_RESOLUTION_COUNT] array in the
parse loop. Bound resolution_count against the array size, folded
into the existing zero-check.
When the WIN10 resolution probe fails, the caller in
hyperv_connect_vsp() left hv->screen_*_max / preferred_* unpopulated,
which sets mode_config.max_width / max_height to 0 and makes
drm_internal_framebuffer_create() reject every userspace framebuffer
with -EINVAL. The pre-WIN10 branch had the same gap for
preferred_width / preferred_height. Use a single post-probe fallback
guarded by screen_width_max == 0 so both paths converge on the WIN8
defaults. |
| Uninitialized Use in Skia in Google Chrome prior to 150.0.7871.182 allowed a remote attacker who had compromised the renderer process to leak cross-origin data via a crafted HTML page. (Chromium security severity: High) |
| Uninitialized Use in Skia in Google Chrome on Windows prior to 151.0.7922.72 allowed a remote attacker to obtain potentially sensitive information from process memory via a crafted HTML page. (Chromium security severity: Low) |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: ensure that nfsd4_fattr_args.context is zeroed out
If nfsd4_encode_fattr4 ends up doing a "goto out" before we get to
checking for the security label, then args.context will be set to
uninitialized junk on the stack, which we'll then try to free.
Initialize it early. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: replace skb_put with skb_put_zero
Avoid potentially reusing uninitialized data |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: mediatek: mt8195: Add platform entry for ETDM1_OUT_BE dai link
Commit e70b8dd26711 ("ASoC: mediatek: mt8195: Remove afe-dai component
and rework codec link") removed the codec entry for the ETDM1_OUT_BE
dai link entirely instead of replacing it with COMP_EMPTY(). This worked
by accident as the remaining COMP_EMPTY() platform entry became the codec
entry, and the platform entry became completely empty, effectively the
same as COMP_DUMMY() since snd_soc_fill_dummy_dai() doesn't do anything
for platform entries.
This causes a KASAN out-of-bounds warning in mtk_soundcard_common_probe()
in sound/soc/mediatek/common/mtk-soundcard-driver.c:
for_each_card_prelinks(card, i, dai_link) {
if (adsp_node && !strncmp(dai_link->name, "AFE_SOF", strlen("AFE_SOF")))
dai_link->platforms->of_node = adsp_node;
else if (!dai_link->platforms->name && !dai_link->platforms->of_node)
dai_link->platforms->of_node = platform_node;
}
where the code expects the platforms array to have space for at least one entry.
Add an COMP_EMPTY() entry so that dai_link->platforms has space. |
| In the Linux kernel, the following vulnerability has been resolved:
nsh: Restore skb->{protocol,data,mac_header} for outer header in nsh_gso_segment().
syzbot triggered various splats (see [0] and links) by a crafted GSO
packet of VIRTIO_NET_HDR_GSO_UDP layering the following protocols:
ETH_P_8021AD + ETH_P_NSH + ETH_P_IPV6 + IPPROTO_UDP
NSH can encapsulate IPv4, IPv6, Ethernet, NSH, and MPLS. As the inner
protocol can be Ethernet, NSH GSO handler, nsh_gso_segment(), calls
skb_mac_gso_segment() to invoke inner protocol GSO handlers.
nsh_gso_segment() does the following for the original skb before
calling skb_mac_gso_segment()
1. reset skb->network_header
2. save the original skb->{mac_heaeder,mac_len} in a local variable
3. pull the NSH header
4. resets skb->mac_header
5. set up skb->mac_len and skb->protocol for the inner protocol.
and does the following for the segmented skb
6. set ntohs(ETH_P_NSH) to skb->protocol
7. push the NSH header
8. restore skb->mac_header
9. set skb->mac_header + mac_len to skb->network_header
10. restore skb->mac_len
There are two problems in 6-7 and 8-9.
(a)
After 6 & 7, skb->data points to the NSH header, so the outer header
(ETH_P_8021AD in this case) is stripped when skb is sent out of netdev.
Also, if NSH is encapsulated by NSH + Ethernet (so NSH-Ethernet-NSH),
skb_pull() in the first nsh_gso_segment() will make skb->data point
to the middle of the outer NSH or Ethernet header because the Ethernet
header is not pulled by the second nsh_gso_segment().
(b)
While restoring skb->{mac_header,network_header} in 8 & 9,
nsh_gso_segment() does not assume that the data in the linear
buffer is shifted.
However, udp6_ufo_fragment() could shift the data and change
skb->mac_header accordingly as demonstrated by syzbot.
If this happens, even the restored skb->mac_header points to
the middle of the outer header.
It seems nsh_gso_segment() has never worked with outer headers so far.
At the end of nsh_gso_segment(), the outer header must be restored for
the segmented skb, instead of the NSH header.
To do that, let's calculate the outer header position relatively from
the inner header and set skb->{data,mac_header,protocol} properly.
[0]:
BUG: KMSAN: uninit-value in ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:524 [inline]
BUG: KMSAN: uninit-value in ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline]
BUG: KMSAN: uninit-value in ipvlan_queue_xmit+0xf44/0x16b0 drivers/net/ipvlan/ipvlan_core.c:668
ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:524 [inline]
ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline]
ipvlan_queue_xmit+0xf44/0x16b0 drivers/net/ipvlan/ipvlan_core.c:668
ipvlan_start_xmit+0x5c/0x1a0 drivers/net/ipvlan/ipvlan_main.c:222
__netdev_start_xmit include/linux/netdevice.h:4989 [inline]
netdev_start_xmit include/linux/netdevice.h:5003 [inline]
xmit_one net/core/dev.c:3547 [inline]
dev_hard_start_xmit+0x244/0xa10 net/core/dev.c:3563
__dev_queue_xmit+0x33ed/0x51c0 net/core/dev.c:4351
dev_queue_xmit include/linux/netdevice.h:3171 [inline]
packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3081 [inline]
packet_sendmsg+0x8aef/0x9f10 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
__sys_sendto+0x735/0xa10 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x125/0x1c0 net/socket.c:2199
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Uninit was created at:
slab_post_alloc_hook mm/slub.c:3819 [inline]
slab_alloc_node mm/slub.c:3860 [inline]
__do_kmalloc_node mm/slub.c:3980 [inline]
__kmalloc_node_track_caller+0x705/0x1000 mm/slub.c:4001
kmalloc_reserve+0x249/0x4a0 net/core/skbuff.c:582
__
---truncated--- |
